====== Système électronique embarqué ======
{{indexmenu>:hardware:embarque#5}}
===== OS =====
* [[http://www.angstrom-distribution.org/|http://www.angstrom-distribution.org/]]
* OpenWRT - [[https://openwrt.org/|https://openwrt.org/]]
* Fork more Recent - [[https://www.lede-project.org/index.html|https://www.lede-project.org/index.html]] Remerged to OpenWRT
* Professional OpenWRT - [[http://dd-wrt.com/site/index|http://dd-wrt.com/site/index]]
* ARMbian - Debian for various ARM-board - https://www.armbian.com
* Kali ARM Image - https://www.offensive-security.com/kali-linux-arm-images/
* Rasbian - official RPi Debian (Work also for orange and banana) - https://raspbian.org/
* OpenBSD - https://www.openbsd.org/armv7.html - https://www.openbsd.org/arm64.html
* AsteroidOS - SmartwatchOS - [[https://asteroidos.org/|https://asteroidos.org/]]
* MinocaOS - [[http://www.minocacorp.com/|http://www.minocacorp.com/]]
===== Construction/Applications =====
* Arduino IDE - https://diyprojects.io/install-arduino-ide-linux-arm-raspberry-pi-orange-pi-odroid/
* Compiler ARMbian - https://projetsdiy.fr/compiler-armbian-orange-banana-pi-cubieboard/
* Kali builder - https://github.com/offensive-security/kali-arm-build-scripts/
* armbian-config - https://projetsdiy.fr/armbian-config-armbian-equivalent-raspi-config-raspbian/
* No DDoS - stop ddos community - https://www.noddos.io/
* OpenWRT additionnal repo - https://github.com/stangri/openwrt-repo
* Wifi Schedule OpenWRT - https://forum.openwrt.org/t/scheduling-on-off-wifi/3385
==== lUCI Theme ====
* Material - https://github.com/LuttyYang/luci-theme-material
* Argon - https://github.com/jerrykuku/luci-theme-argon
===== Infos =====
* [[http://planet.madeinfr.org/|http://planet.madeinfr.org/]]
* [[https://github.com/openhomeautomation|https://github.com/openhomeautomation]]
* [[http://www.framboise314.fr/vos-cable-sur-mesure-avec-latelierducable/|www.framboise314.fr/vos-cable-sur-mesure-avec-latelierducable/]]
Autre système:
* [[http://www.adapteva.com/|http://www.adapteva.com/]] ===⇒ [[https://github.com/LordRafa/Parallella-cgminer|https://github.com/LordRafa/Parallella-cgminer]]
* [[https://www.kickstarter.com/projects/onion/omega2-5-iot-computer-with-wi-fi-powered-by-linux|https://www.kickstarter.com/projects/onion/omega2-5-iot-computer-with-wi-fi-powered-by-linux]]
* [[http://www.technoblogy.com/show?1INT|http://www.technoblogy.com/show?1INT]]
* [[https://www.networkshare.fr/2016/11/button-amazon-dash-liste-idees-hacks|https://www.networkshare.fr/2016/11/button-amazon-dash-liste-idees-hacks]]
* [[https://www.helium.com/|https://www.helium.com/]]
* Xiaomi TV - [[http://www.gearbest.com/tv-box-mini-pc/pp_426056.html?wid=4&lkid=10317363|http://www.gearbest.com/tv-box-mini-pc/pp_426056.html?wid=4&lkid=10317363]] avec KODI
* http://www.minimachines.net/actu/nanopi-neo-49769
===== NumWorks/Epsilon =====
* https://www.numworks.com/resources/engineering/software/sdk/
===== Brique Internet =====
* https://brique.svnet.fr/wiki/doku.php?id=install
===== OLinuxino =====
* https://www.cypouz.com//article/150127/nano-ordinateur-olinuxino-a10-lime
==== WiFi ====
* [[http://www.esp8266.com/wiki/doku.php?id=raspberrypi:getting_started|http://www.esp8266.com/wiki/doku.php?id=raspberrypi:getting_started]]
* [[https://blog.bandinelli.net/index.php?post/2016/11/08/Se-connecter-%C3%A0-l-ESP8266-avec-Ampy-d-Adafruit|https://blog.bandinelli.net/index.php?post/2016/11/08/Se-connecter-%C3%A0-l-ESP8266-avec-Ampy-d-Adafruit]]
==== Connexion série ====
* control via USB serie ( sudo screen /dev/ttyACM0) [[https://gist.github.com/codec/2828182|https://gist.github.com/codec/2828182]] - screenrc serial ou picocom
* [[https://github.com/npat-efault/picocom|https://github.com/npat-efault/picocom]]
* [[https://developer.ridgerun.com/wiki/index.php/Setting_up_Picocom_-_Ubuntu|https://developer.ridgerun.com/wiki/index.php/Setting_up_Picocom_-_Ubuntu]]
==== Easy Share ====
* https://debian-facile.org/doc:reseau:ssh:sshfs
* https://www.admin-linux.fr/montage-sshfs-via-autofs-5-multi-utilisateurs/
* https://dadarevue.com/carte-sd-raspberry-prolonger-duree-vie/
==== USB deporté ====
* https://3mdeb.com/os-dev/linux-rpi-and-usb-over-ip-updated/
* https://gist.github.com/mildred/723e60d7af9ab9077335
===== Performance =====
* log2ram - https://github.com/azlux/log2ram
* zram-swap-config - https://github.com/StuartIanNaylor/zram-swap-config
* zramdrive - https://github.com/StuartIanNaylor/zramdrive
* log2zram - https://github.com/StuartIanNaylor/log2zram
* watchdog - https://www.supertechcrew.com/watchdog-keeping-system-always-running/
===== Sécurité =====
http://iotscanner.bullguard.com/search
==== IPtables ====
Minimal rules iptables-persistent /etc/iptables/rules.v4
# Generated by iptables-save v1.4.21 on Sat Mar 10 07:07:47 2018
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p ipv6 -j ACCEPT
-A INPUT -m conntrack --ctstate INVALID -j DROP
-A INPUT -p icmp -m icmp --icmp-type 8 -m conntrack --ctstate NEW,RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 139 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 445 -j ACCEPT
-A INPUT -p udp -m udp --dport 53 -j ACCEPT
-A INPUT -p udp -m udp --dport 137 -j ACCEPT
-A INPUT -p udp -m udp --dport 138 -j ACCEPT
-A INPUT -p udp -m udp --dport 5353 -j ACCEPT
-A INPUT -p udp -m udp --dport 60000:61000 -j ACCEPT
COMMIT
# Completed on Sat Mar 10 07:07:47 2018
==== Restricted User ====
* https://www.tecmint.com/rbash-a-restricted-bash-shell-explained-with-practical-examples/
==== Restricted Menu ====
* https://stackoverflow.com/questions/833247/how-to-jail-linux-user
=== Mode kiosk ===
* https://surf.suckless.org/files/kiosk_mode/
==== Hardening ====
=== Security audit your ARM board with Lynis ===
Be it powerful production servers, or humble home hosted ARM boards, an internet facing system requires that we take security very seriously.
But security is hard. No matter how much we try to secure our systems, any small detail we oversee can ruin all our efforts.
In the same way that intruders make use of automated scanning tools to detect vulnerabilities, we also have some tools at our hand to help secure our systems and try to validate that we are not missing anything.
Lynis is an open source security auditing tool. It is really simple to use and allows us to perform a thorough security analysis.
== Installation ==
Install not only the lynis package, but also some other helpful tools
# apt-get install lynis debian-goodies needrestart debsums debsecan
Probably too much for an ARM board, but in a production server we can also afford to include
# apt-get install apt-listbugs samhain tripwire
We will cover those other tools in another post.
== Usage ==
Just
# lynis audit system
You can run a non privileged scan for pentesting
# lynis audit --pentest
These examples run with the default profile, which you can find in /etc/lynis/default.prf. It is recommended that add your modifications to custom.prf instead of modifying default.prf directly.
Your modifications to custom.prf will be picked up automatically. If we want to run from another custom profile we can indicate it with
# lynis audit system --profile /myprofile.prf
Warnings will have an explanation and a code, such as ACCT-9628. Also, we will receive suggestions on how to solve, and a link to their extensive documentation, in our example this link.
As we try to fix issues, it is handy to see how Lynis checks for a particular warning to be issued. We can do this by inspecting the log /var/log/lynis.log, or with the command
# lynis show details ACCT-9628
2017-12-23 11:42:10 Performing test ID ACCT-9628 (Check for auditd)
2017-12-23 11:42:10 Test: Check auditd status
2017-12-23 11:42:10 IsRunning: process 'auditd' not found
2017-12-23 11:42:10 Result: auditd not active
2017-12-23 11:42:10 Suggestion: Enable auditd to collect audit information [test:ACCT-9628] [details:-] [solution:-]
2017-12-23 11:42:10 Hardening: assigned partial number of hardening points (0 of 1). Currently having 139 points (out of 227)
=== Lynis in ARM boards ===
The output of the above commands will provide us with very valuable information to improve our security and the configuration of our system.
For instance, this is the output after installing on plain Raspbian
------------------------------------
- Checking IPv6 configuration [ ENABLED ]
Configuration method [ AUTO ]
IPv6 only [ NO ]
- Checking configured nameservers
- Testing nameservers
Nameserver: 192.168.0.5 [ SKIPPED ]
- Minimal of 2 responsive nameservers [ SKIPPED ]
- Checking default gateway [ DONE ]
- Getting listening ports (TCP/UDP) [ DONE ]
* Found 7 ports
- Checking promiscuous interfaces [ OK ]
- Checking waiting connections [ OK ]
- Checking status DHCP client [ NOT ACTIVE ]
- Checking for ARP monitoring software [ NOT FOUND ]
[+] Printers and Spools
------------------------------------
- Checking cups daemon [ NOT FOUND ]
- Checking lp daemon [ NOT RUNNING ]
[+] Software: e-mail and messaging
------------------------------------
- Checking Exim status [ NOT FOUND ]
- Checking Postfix status [ NOT FOUND ]
- Checking Dovecot status [ NOT FOUND ]
- Checking Qmail status [ NOT FOUND ]
- Checking Sendmail status [ NOT FOUND ]
[+] Software: firewalls
------------------------------------
- Checking iptables kernel module [ FOUND ]
- Checking iptables policies of chains [ FOUND ]
INVALID OPTION (Display): YELLOW
- Checking for empty ruleset [ WARNING ]
- Checking for unused rules [ OK ]
- Checking host based firewall [ ACTIVE ]
[+] Software: webserver
------------------------------------
- Checking Apache [ NOT FOUND ]
- Checking nginx [ NOT FOUND ]
[+] SSH Support
------------------------------------
- Checking running SSH daemon [ FOUND ]
- Searching SSH configuration [ FOUND ]
- SSH option: AllowTcpForwarding [ SUGGESTION ]
- SSH option: ClientAliveCountMax [ SUGGESTION ]
- SSH option: ClientAliveInterval [ OK ]
- SSH option: Compression [ SUGGESTION ]
- SSH option: FingerprintHash [ OK ]
- SSH option: GatewayPorts [ OK ]
- SSH option: IgnoreRhosts [ OK ]
- SSH option: LoginGraceTime [ OK ]
- SSH option: LogLevel [ SUGGESTION ]
- SSH option: MaxAuthTries [ SUGGESTION ]
- SSH option: MaxSessions [ SUGGESTION ]
- SSH option: PermitRootLogin [ SUGGESTION ]
- SSH option: PermitUserEnvironment [ OK ]
- SSH option: PermitTunnel [ OK ]
- SSH option: Port [ SUGGESTION ]
- SSH option: PrintLastLog [ OK ]
- SSH option: Protocol [ NOT FOUND ]
- SSH option: StrictModes [ OK ]
- SSH option: TCPKeepAlive [ SUGGESTION ]
- SSH option: UseDNS [ OK ]
- SSH option: UsePrivilegeSeparation [ OK ]
- SSH option: VerifyReverseMapping [ NOT FOUND ]
- SSH option: X11Forwarding [ SUGGESTION ]
- SSH option: AllowAgentForwarding [ SUGGESTION ]
- SSH option: AllowUsers [ NOT FOUND ]
- SSH option: AllowGroups [ NOT FOUND ]
[+] SNMP Support
------------------------------------
- Checking running SNMP daemon [ NOT FOUND ]
[+] Databases
------------------------------------
No database engines found
[+] LDAP Services
------------------------------------
- Checking OpenLDAP instance [ NOT FOUND ]
[+] PHP
------------------------------------
- Checking PHP [ NOT FOUND ]
[+] Squid Support
------------------------------------
- Checking running Squid daemon [ NOT FOUND ]
[+] Logging and files
------------------------------------
- Checking for a running log daemon [ OK ]
- Checking Syslog-NG status [ NOT FOUND ]
- Checking systemd journal status [ FOUND ]
- Checking Metalog status [ NOT FOUND ]
- Checking RSyslog status [ FOUND ]
- Checking RFC 3195 daemon status [ NOT FOUND ]
- Checking minilogd instances [ NOT FOUND ]
- Checking logrotate presence [ OK ]
- Checking log directories (static list) [ DONE ]
- Checking open log files [ SKIPPED ]
[+] Insecure services
------------------------------------
- Checking inetd status [ NOT ACTIVE ]
[+] Banners and identification
------------------------------------
- /etc/issue [ FOUND ]
- /etc/issue contents [ WEAK ]
- /etc/issue.net [ FOUND ]
- /etc/issue.net contents [ WEAK ]
[+] Scheduled tasks
------------------------------------
- Checking crontab/cronjob [ DONE ]
[+] Accounting
------------------------------------
- Checking accounting information [ NOT FOUND ]
- Checking sysstat accounting data [ NOT FOUND ]
- Checking auditd [ NOT FOUND ]
[+] Time and Synchronization
------------------------------------
- NTP daemon found: systemd (timesyncd) [ FOUND ]
- Checking for a running NTP daemon or client [ OK ]
[+] Cryptography
------------------------------------
- Checking for expired SSL certificates [ NONE ]
[+] Virtualization
------------------------------------
[+] Containers
------------------------------------
[+] Security frameworks
------------------------------------
- Checking presence AppArmor [ NOT FOUND ]
- Checking presence SELinux [ NOT FOUND ]
- Checking presence grsecurity [ NOT FOUND ]
- Checking for implemented MAC framework [ NONE ]
[+] Software: file integrity
------------------------------------
- Checking file integrity tools
- Checking presence integrity tool [ NOT FOUND ]
[+] Software: System tooling
------------------------------------
- Checking automation tooling
- Automation tooling [ NOT FOUND ]
- Checking for IDS/IPS tooling [ NONE ]
[+] Software: Malware
------------------------------------
[+] File Permissions
------------------------------------
- Starting file permissions check
/etc/lilo.conf [ NOT FOUND ]
/root/.ssh [ NOT FOUND ]
[+] Home directories
------------------------------------
- Checking shell history files [ OK ]
[+] Kernel Hardening
------------------------------------
- Comparing sysctl key pairs with scan profile
- kernel.core_uses_pid (exp: 1) [ DIFFERENT ]
- kernel.ctrl-alt-del (exp: 0) [ OK ]
- kernel.kptr_restrict (exp: 2) [ DIFFERENT ]
- kernel.randomize_va_space (exp: 2) [ OK ]
- kernel.sysrq (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.all.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.all.accept_source_route (exp: 0) [ OK ]
- net.ipv4.conf.all.bootp_relay (exp: 0) [ OK ]
- net.ipv4.conf.all.forwarding (exp: 0) [ OK ]
- net.ipv4.conf.all.log_martians (exp: 1) [ DIFFERENT ]
- net.ipv4.conf.all.mc_forwarding (exp: 0) [ OK ]
- net.ipv4.conf.all.proxy_arp (exp: 0) [ OK ]
- net.ipv4.conf.all.rp_filter (exp: 1) [ DIFFERENT ]
- net.ipv4.conf.all.send_redirects (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.default.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.default.accept_source_route (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.default.log_martians (exp: 1) [ DIFFERENT ]
- net.ipv4.icmp_echo_ignore_broadcasts (exp: 1) [ OK ]
- net.ipv4.icmp_ignore_bogus_error_responses (exp: 1) [ OK ]
- net.ipv4.tcp_syncookies (exp: 1) [ OK ]
- net.ipv4.tcp_timestamps (exp: 0) [ DIFFERENT ]
- net.ipv6.conf.all.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv6.conf.all.accept_source_route (exp: 0) [ OK ]
- net.ipv6.conf.default.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv6.conf.default.accept_source_route (exp: 0) [ OK ]
[+] Hardening
------------------------------------
- Installed compiler(s) [ FOUND ]
- Installed malware scanner [ NOT FOUND ]
- Installed malware scanner [ NOT FOUND ]
[+] Custom Tests
------------------------------------
- Running custom tests... [ NONE ]
[+] Plugins (phase 2)
------------------------------------
================================================================================
-[ Lynis 2.4.0 Results ]-
Warnings (3):
----------------------------
! Version of Lynis is very old and should be updated [LYNIS]
https://cisofy.com/controls/LYNIS/
! Can't find any security repository in /etc/apt/sources.list or sources.list.d directory [PKGS-7388]
https://cisofy.com/controls/PKGS-7388/
! iptables module(s) loaded, but no rules active [FIRE-4512]
https://cisofy.com/controls/FIRE-4512/
Suggestions (43):
----------------------------
* Install libpam-tmpdir to set $TMP and $TMPDIR for PAM sessions [CUST-0280]
https://your-domain.example.org/controls/CUST-0280/
* Install libpam-usb to enable multi-factor authentication for PAM sessions [CUST-0285]
https://your-domain.example.org/controls/CUST-0285/
* Install apt-listbugs to display a list of critical bugs prior to each APT installation. [CUST-0810]
https://your-domain.example.org/controls/CUST-0810/
* Install debian-goodies so that you can run checkrestart after upgrades to determine which services are using old versions of libraries and need restarting. [CUST-0830]
https://your-domain.example.org/controls/CUST-0830/
* Install needrestart, alternatively to debian-goodies, so that you can run needrestart after upgrades to determine which daemons are using old versions of libraries and need restarting. [CUST-0831]
https://your-domain.example.org/controls/CUST-0831/
* Install debsecan to generate lists of vulnerabilities which affect this installation. [CUST-0870]
https://your-domain.example.org/controls/CUST-0870/
* Install debsums for the verification of installed package files against MD5 checksums. [CUST-0875]
https://your-domain.example.org/controls/CUST-0875/
* Install fail2ban to automatically ban hosts that commit multiple authentication errors. [DEB-0880]
https://cisofy.com/controls/DEB-0880/
* Use a PAE enabled kernel when possible to gain native No eXecute/eXecute Disable support [KRNL-5677]
https://cisofy.com/controls/KRNL-5677/
* Discover why /vmlinuz is missing. Consider manually re-linking. [KRNL-5788]
https://cisofy.com/controls/KRNL-5788/
* Check the output of apt-cache policy manually to determine why output is empty [KRNL-5788]
https://cisofy.com/controls/KRNL-5788/
* Install a PAM module for password strength testing like pam_cracklib or pam_passwdqc [AUTH-9262]
https://cisofy.com/controls/AUTH-9262/
* Configure minimum password age in /etc/login.defs [AUTH-9286]
https://cisofy.com/controls/AUTH-9286/
* Configure maximum password age in /etc/login.defs [AUTH-9286]
https://cisofy.com/controls/AUTH-9286/
* Default umask in /etc/login.defs could be more strict like 027 [AUTH-9328]
https://cisofy.com/controls/AUTH-9328/
* To decrease the impact of a full /home file system, place /home on a separated partition [FILE-6310]
https://cisofy.com/controls/FILE-6310/
* To decrease the impact of a full /tmp file system, place /tmp on a separated partition [FILE-6310]
https://cisofy.com/controls/FILE-6310/
* To decrease the impact of a full /var file system, place /var on a separated partition [FILE-6310]
https://cisofy.com/controls/FILE-6310/
* Disable drivers like USB storage when not used, to prevent unauthorized storage or data theft [STRG-1840]
https://cisofy.com/controls/STRG-1840/
* Disable drivers like firewire storage when not used, to prevent unauthorized storage or data theft [STRG-1846]
https://cisofy.com/controls/STRG-1846/
* Install debsums utility for the verification of packages with known good database. [PKGS-7370]
https://cisofy.com/controls/PKGS-7370/
* Consider running ARP monitoring software (arpwatch,arpon) [NETW-3032]
https://cisofy.com/controls/NETW-3032/
* Consider hardening SSH configuration [SSH-7408]
- Details : AllowTcpForwarding (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : ClientAliveCountMax (3 --> 2)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : Compression (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : LogLevel (INFO --> VERBOSE)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : MaxAuthTries (6 --> 1)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : MaxSessions (10 --> 2)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : PermitRootLogin (WITHOUT-PASSWORD --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : Port (22 --> )
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : TCPKeepAlive (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : X11Forwarding (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : AllowAgentForwarding (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Add a legal banner to /etc/issue, to warn unauthorized users [BANN-7126]
https://cisofy.com/controls/BANN-7126/
* Add legal banner to /etc/issue.net, to warn unauthorized users [BANN-7130]
https://cisofy.com/controls/BANN-7130/
* Enable process accounting [ACCT-9622]
https://cisofy.com/controls/ACCT-9622/
# Won't install apt-listbugs and all its ruby dependencies
skip-test=CUST-0810
# Won't install puppet or similar
skip-test=TOOL-5002
# Raspbian doesn't have security sources ( https://www.raspberrypi.org/forums/viewtopic.php?t=98006&p=680175 )
skip-test=PKGS-7388
# We have a preset partition scheme in the SD card
skip-test=FILE-6310
# We don't use firewire
skip-test=STRG-1846
# We use USB in NCP
skip-test=STRG-1840
# Won't recompile kernel to support auditd
skip-test=ACCT-9628
# Won't be protected against DDOS in self-hosting, will save the resources
skip-test=HTTP-6640
skip-test=HTTP-6641
# vmlinuz missing at least in Raspbian
skip-test=KRNL-5788
# won't recompile kernels for PAE NX
skip-test=KRNL-5677
* Enable sysstat to collect accounting (no results) [ACCT-9626]
https://cisofy.com/controls/ACCT-9626/
* Enable auditd to collect audit information [ACCT-9628]
https://cisofy.com/controls/ACCT-9628/
* Install a file integrity tool to monitor changes to critical and sensitive files [FINT-4350]
https://cisofy.com/controls/FINT-4350/
* Determine if automation tools are present for system management [TOOL-5002]
https://cisofy.com/controls/TOOL-5002/
* One or more sysctl values differ from the scan profile and could be tweaked [KRNL-6000]
https://cisofy.com/controls/KRNL-6000/
* Harden compilers like restricting access to root user only [HRDN-7222]
https://cisofy.com/controls/HRDN-7222/
* Harden the system by installing at least one malware scanner, to perform periodic file system scans [HRDN-7230]
- Solution : Install a tool like rkhunter, chkrootkit, OSSEC
https://cisofy.com/controls/HRDN-7230/
Follow-up:
----------------------------
- Show details of a test (lynis show details TEST-ID)
- Check the logfile for all details (less /var/log/lynis.log)
- Read security controls texts (https://cisofy.com)
- Use --upload to upload data to central system (Lynis Enterprise users)
================================================================================
Lynis security scan details:
Hardening index : 57 [########### ]
Tests performed : 203
Plugins enabled : 1
Components:
- Firewall [V]
- Malware scanner [X]
Lynis Modules:
- Compliance Status [?]
- Security Audit [V]
- Vulnerability Scan [V]
Files:
- Test and debug information : /var/log/lynis.log
- Report data : /var/log/lynis-report.dat
================================================================================
Notice: Lynis update available
Current version : 240 Latest version : 257
================================================================================
Lynis 2.4.0
Auditing, system hardening, and compliance for UNIX-based systems
(Linux, macOS, BSD, and others)
2007-2016, CISOfy - https://cisofy.com/lynis/
Enterprise support available (compliance, plugins, interface and tools)
================================================================================
[TIP]: Enhance Lynis audits by adding your settings to custom.prf (see /etc/lynis/default.prf for all settings)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
[ Lynis 2.4.0 ]
################################################################################
Lynis comes with ABSOLUTELY NO WARRANTY. This is free software, and you are
welcome to redistribute it under the terms of the GNU General Public License.
See the LICENSE file for details about using this software.
2007-2016, CISOfy - https://cisofy.com/lynis/
Enterprise support available (compliance, plugins, interface and tools)
################################################################################
[+] Initializing program
------------------------------------
- Detecting OS... [ DONE ]
- Checking profiles... [ DONE ]
---------------------------------------------------
Program version: 2.4.0
Operating system: Linux
Operating system name: Debian
Operating system version: 9.1
Kernel version: 4.9.59
Hardware platform: armv7l
Hostname: raspberrypi
---------------------------------------------------
Profiles: /etc/lynis/default.prf
Log file: /var/log/lynis.log
Report file: /var/log/lynis-report.dat
Report version: 1.0
Plugin directory: /etc/lynis/plugins
---------------------------------------------------
Auditor: [Not Specified]
Test category: all
Test group: all
---------------------------------------------------
- Program update status... [ WARNING ]
===============================================================================
Lynis update available
===============================================================================
Current version is more than 4 months old
Current version : 240 Latest version : 257
Please update to the latest version.
New releases include additional features, bug fixes, tests and baselines.
Download the latest version:
Packages (DEB/RPM) - https://packages.cisofy.com
Website - https://cisofy.com/downloads/
GitHub - https://github.com/CISOfy/lynis
===============================================================================
[+] System Tools
------------------------------------
- Scanning available tools...
- Checking system binaries...
[+] Plugins (phase 1)
------------------------------------
Note: plugins have more extensive tests and may take several minutes to complete
- Plugin: debian
[
[+] Debian Tests
------------------------------------
- Checking for system binaries that are required by Debian Tests...
- Checking /bin... [ FOUND ]
- Checking /sbin... [ FOUND ]
- Checking /usr/bin... [ FOUND ]
- Checking /usr/sbin... [ FOUND ]
- Checking /usr/local/bin... [ FOUND ]
- Checking /usr/local/sbin... [ FOUND ]
- Authentication:
- PAM (Pluggable Authentication Modules):
- libpam-tmpdir [ Not Installed ]
- libpam-usb [ Not Installed ]
- File System Checks:
- DM-Crypt, Cryptsetup & Cryptmount:
- Software:
- apt-listbugs [ Not Installed ]
- apt-listchanges [ Installed and enabled for apt ]
- checkrestart [ Not Installed ]
- needrestart [ Not Installed ]
- debsecan [ Not Installed ]
- debsums [ Not Installed ]
- fail2ban [ Not Installed ]
]
[+] Boot and services
------------------------------------
- Service Manager [ systemd ]
- Checking UEFI boot [ DISABLED ]
- Boot loader [ NONE FOUND ]
- Check running services (systemctl) [ DONE ]
Result: found 15 running services
- Check enabled services at boot (systemctl) [ DONE ]
Result: found 23 enabled services
- Check startup files (permissions) [ OK ]
[+] Kernel
------------------------------------
- Checking default run level [ RUNLEVEL 5 ]
- Checking CPU support (NX/PAE)
CPU support: No PAE or NoeXecute supported [ NONE ]
- Checking kernel version and release [ DONE ]
- Checking kernel type [ DONE ]
- Checking loaded kernel modules [ DONE ]
Found 20 active modules
- Checking Linux kernel configuration file [ NOT FOUND ]
- Checking for available kernel update [ UNKNOWN ]
- Checking core dumps configuration [ DISABLED ]
- Checking setuid core dumps configuration [ DEFAULT ]
- Check if reboot is needed [ UNKNOWN ]
[+] Memory and Processes
------------------------------------
- Checking /proc/meminfo [ FOUND ]
- Searching for dead/zombie processes [ OK ]
- Searching for IO waiting processes [ OK ]
[+] Users, Groups and Authentication
------------------------------------
- Administrator accounts [ OK ]
- Unique UIDs [ OK ]
- Consistency of group files (grpck) [ OK ]
- Unique group IDs [ OK ]
- Unique group names [ OK ]
- Password file consistency [ OK ]
- Query system users (non daemons) [ DONE ]
- NIS+ authentication support [ NOT ENABLED ]
- NIS authentication support [ NOT ENABLED ]
- sudoers file [ FOUND ]
- Check sudoers file permissions [ OK ]
- PAM password strength tools [ SUGGESTION ]
- PAM configuration files (pam.conf) [ FOUND ]
- PAM configuration files (pam.d) [ FOUND ]
- PAM modules [ NOT FOUND ]
- LDAP module in PAM [ NOT FOUND ]
- Accounts without expire date [ OK ]
- Accounts without password [ OK ]
- Checking user password aging (minimum) [ DISABLED ]
- User password aging (maximum) [ DISABLED ]
- Checking expired passwords [ OK ]
- Checking Linux single user mode authentication [ OK ]
- Determining default umask
- umask (/etc/profile) [ NOT FOUND ]
- umask (/etc/login.defs) [ SUGGESTION ]
- LDAP authentication support [ NOT ENABLED ]
- Logging failed login attempts [ ENABLED ]
[+] Shells
------------------------------------
- Checking shells from /etc/shells
Result: found 4 shells (valid shells: 4).
- Session timeout settings/tools [ NONE ]
- Checking default umask values
- Checking default umask in /etc/bash.bashrc [ NONE ]
- Checking default umask in /etc/profile [ NONE ]
[+] File systems
------------------------------------
- Checking mount points
- Checking /home mount point [ SUGGESTION ]
- Checking /tmp mount point [ SUGGESTION ]
- Checking /var mount point [ SUGGESTION ]
- Query swap partitions (fstab) [ NONE ]
- Testing swap partitions [ OK ]
- Testing /proc mount (hidepid) [ SUGGESTION ]
- Checking for old files in /tmp [ OK ]
- Checking /tmp sticky bit [ OK ]
- ACL support root file system [ ENABLED ]
- Mount options of / [ NON DEFAULT ]
- Mount options of /boot [ NON DEFAULT ]
- Disable kernel support of some filesystems
- Discovered kernel modules: hfs hfsplus jffs2 squashfs udf
[+] Storage
------------------------------------
- Checking usb-storage driver (modprobe config) [ NOT DISABLED ]
- Checking USB devices authorization [ ENABLED ]
- Checking firewire ohci driver (modprobe config) [ NOT DISABLED ]
[+] NFS
------------------------------------
- Query rpc registered programs [ DONE ]
- Query NFS versions [ DONE ]
- Query NFS protocols [ DONE ]
- Check running NFS daemon [ NOT FOUND ]
[+] Name services
------------------------------------
- Checking default DNS search domain [ FOUND ]
- Searching DNS domain name [ FOUND ]
Domain name: Home
- Checking /etc/hosts
- Checking /etc/hosts (duplicates) [ OK ]
- Checking /etc/hosts (hostname) [ OK ]
- Checking /etc/hosts (localhost) [ OK ]
[+] Ports and packages
------------------------------------
- Searching package managers
- Searching dpkg package manager [ FOUND ]
- Querying package manager
- Query unpurged packages [ NONE ]
- Checking security repository in sources.list file or directory [ WARNING ]
- Checking vulnerable packages (apt-get only) [ DONE ]
- Checking package audit tool [ INSTALLED ]
Found: apt-get
[+] Networking
------------------------------------
- Checking IPv6 configuration [ ENABLED ]
Configuration method [ AUTO ]
IPv6 only [ NO ]
- Checking configured nameservers
- Testing nameservers
Nameserver: 192.168.0.5 [ SKIPPED ]
- Minimal of 2 responsive nameservers [ SKIPPED ]
- Checking default gateway [ DONE ]
- Getting listening ports (TCP/UDP) [ DONE ]
* Found 7 ports
- Checking promiscuous interfaces [ OK ]
- Checking waiting connections [ OK ]
- Checking status DHCP client [ NOT ACTIVE ]
- Checking for ARP monitoring software [ NOT FOUND ]
[+] Printers and Spools
------------------------------------
- Checking cups daemon [ NOT FOUND ]
- Checking lp daemon [ NOT RUNNING ]
[+] Software: e-mail and messaging
------------------------------------
- Checking Exim status [ NOT FOUND ]
- Checking Postfix status [ NOT FOUND ]
- Checking Dovecot status [ NOT FOUND ]
- Checking Qmail status [ NOT FOUND ]
- Checking Sendmail status [ NOT FOUND ]
[+] Software: firewalls
------------------------------------
- Checking iptables kernel module [ FOUND ]
- Checking iptables policies of chains [ FOUND ]
INVALID OPTION (Display): YELLOW
- Checking for empty ruleset [ WARNING ]
- Checking for unused rules [ OK ]
- Checking host based firewall [ ACTIVE ]
[+] Software: webserver
------------------------------------
- Checking Apache [ NOT FOUND ]
- Checking nginx [ NOT FOUND ]
[+] SSH Support
------------------------------------
- Checking running SSH daemon [ FOUND ]
- Searching SSH configuration [ FOUND ]
- SSH option: AllowTcpForwarding [ SUGGESTION ]
- SSH option: ClientAliveCountMax [ SUGGESTION ]
- SSH option: ClientAliveInterval [ OK ]
- SSH option: Compression [ SUGGESTION ]
- SSH option: FingerprintHash [ OK ]
- SSH option: GatewayPorts [ OK ]
- SSH option: IgnoreRhosts [ OK ]
- SSH option: LoginGraceTime [ OK ]
- SSH option: LogLevel [ SUGGESTION ]
- SSH option: MaxAuthTries [ SUGGESTION ]
- SSH option: MaxSessions [ SUGGESTION ]
- SSH option: PermitRootLogin [ SUGGESTION ]
- SSH option: PermitUserEnvironment [ OK ]
- SSH option: PermitTunnel [ OK ]
- SSH option: Port [ SUGGESTION ]
- SSH option: PrintLastLog [ OK ]
- SSH option: Protocol [ NOT FOUND ]
- SSH option: StrictModes [ OK ]
- SSH option: TCPKeepAlive [ SUGGESTION ]
- SSH option: UseDNS [ OK ]
- SSH option: UsePrivilegeSeparation [ OK ]
- SSH option: VerifyReverseMapping [ NOT FOUND ]
- SSH option: X11Forwarding [ SUGGESTION ]
- SSH option: AllowAgentForwarding [ SUGGESTION ]
- SSH option: AllowUsers [ NOT FOUND ]
- SSH option: AllowGroups [ NOT FOUND ]
[+] SNMP Support
------------------------------------
- Checking running SNMP daemon [ NOT FOUND ]
[+] Databases
------------------------------------
No database engines found
[+] LDAP Services
------------------------------------
- Checking OpenLDAP instance [ NOT FOUND ]
[+] PHP
------------------------------------
- Checking PHP [ NOT FOUND ]
[+] Squid Support
------------------------------------
- Checking running Squid daemon [ NOT FOUND ]
[+] Logging and files
------------------------------------
- Checking for a running log daemon [ OK ]
- Checking Syslog-NG status [ NOT FOUND ]
- Checking systemd journal status [ FOUND ]
- Checking Metalog status [ NOT FOUND ]
- Checking RSyslog status [ FOUND ]
- Checking RFC 3195 daemon status [ NOT FOUND ]
- Checking minilogd instances [ NOT FOUND ]
- Checking logrotate presence [ OK ]
- Checking log directories (static list) [ DONE ]
- Checking open log files [ SKIPPED ]
[+] Insecure services
------------------------------------
- Checking inetd status [ NOT ACTIVE ]
[+] Banners and identification
------------------------------------
- /etc/issue [ FOUND ]
- /etc/issue contents [ WEAK ]
- /etc/issue.net [ FOUND ]
- /etc/issue.net contents [ WEAK ]
[+] Scheduled tasks
------------------------------------
- Checking crontab/cronjob [ DONE ]
[+] Accounting
------------------------------------
- Checking accounting information [ NOT FOUND ]
- Checking sysstat accounting data [ NOT FOUND ]
- Checking auditd [ NOT FOUND ]
[+] Time and Synchronization
------------------------------------
- NTP daemon found: systemd (timesyncd) [ FOUND ]
- Checking for a running NTP daemon or client [ OK ]
[+] Cryptography
------------------------------------
- Checking for expired SSL certificates [ NONE ]
[+] Virtualization
------------------------------------
[+] Containers
------------------------------------
[+] Security frameworks
------------------------------------
- Checking presence AppArmor [ NOT FOUND ]
- Checking presence SELinux [ NOT FOUND ]
- Checking presence grsecurity [ NOT FOUND ]
- Checking for implemented MAC framework [ NONE ]
[+] Software: file integrity
------------------------------------
- Checking file integrity tools
- Checking presence integrity tool [ NOT FOUND ]
[+] Software: System tooling
------------------------------------
- Checking automation tooling
- Automation tooling [ NOT FOUND ]
- Checking for IDS/IPS tooling [ NONE ]
[+] Software: Malware
------------------------------------
[+] File Permissions
------------------------------------
- Starting file permissions check
/etc/lilo.conf [ NOT FOUND ]
/root/.ssh [ NOT FOUND ]
[+] Home directories
------------------------------------
- Checking shell history files [ OK ]
[+] Kernel Hardening
------------------------------------
- Comparing sysctl key pairs with scan profile
- kernel.core_uses_pid (exp: 1) [ DIFFERENT ]
- kernel.ctrl-alt-del (exp: 0) [ OK ]
- kernel.kptr_restrict (exp: 2) [ DIFFERENT ]
- kernel.randomize_va_space (exp: 2) [ OK ]
- kernel.sysrq (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.all.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.all.accept_source_route (exp: 0) [ OK ]
- net.ipv4.conf.all.bootp_relay (exp: 0) [ OK ]
- net.ipv4.conf.all.forwarding (exp: 0) [ OK ]
- net.ipv4.conf.all.log_martians (exp: 1) [ DIFFERENT ]
- net.ipv4.conf.all.mc_forwarding (exp: 0) [ OK ]
- net.ipv4.conf.all.proxy_arp (exp: 0) [ OK ]
- net.ipv4.conf.all.rp_filter (exp: 1) [ DIFFERENT ]
- net.ipv4.conf.all.send_redirects (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.default.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.default.accept_source_route (exp: 0) [ DIFFERENT ]
- net.ipv4.conf.default.log_martians (exp: 1) [ DIFFERENT ]
- net.ipv4.icmp_echo_ignore_broadcasts (exp: 1) [ OK ]
- net.ipv4.icmp_ignore_bogus_error_responses (exp: 1) [ OK ]
- net.ipv4.tcp_syncookies (exp: 1) [ OK ]
- net.ipv4.tcp_timestamps (exp: 0) [ DIFFERENT ]
- net.ipv6.conf.all.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv6.conf.all.accept_source_route (exp: 0) [ OK ]
- net.ipv6.conf.default.accept_redirects (exp: 0) [ DIFFERENT ]
- net.ipv6.conf.default.accept_source_route (exp: 0) [ OK ]
[+] Hardening
------------------------------------
- Installed compiler(s) [ FOUND ]
- Installed malware scanner [ NOT FOUND ]
- Installed malware scanner [ NOT FOUND ]
[+] Custom Tests
------------------------------------
- Running custom tests... [ NONE ]
[+] Plugins (phase 2)
------------------------------------
================================================================================
-[ Lynis 2.4.0 Results ]-
Warnings (3):
----------------------------
! Version of Lynis is very old and should be updated [LYNIS]
https://cisofy.com/controls/LYNIS/
! Can't find any security repository in /etc/apt/sources.list or sources.list.d directory [PKGS-7388]
https://cisofy.com/controls/PKGS-7388/
! iptables module(s) loaded, but no rules active [FIRE-4512]
https://cisofy.com/controls/FIRE-4512/
Suggestions (43):
----------------------------
* Install libpam-tmpdir to set $TMP and $TMPDIR for PAM sessions [CUST-0280]
https://your-domain.example.org/controls/CUST-0280/
* Install libpam-usb to enable multi-factor authentication for PAM sessions [CUST-0285]
https://your-domain.example.org/controls/CUST-0285/
* Install apt-listbugs to display a list of critical bugs prior to each APT installation. [CUST-0810]
https://your-domain.example.org/controls/CUST-0810/
* Install debian-goodies so that you can run checkrestart after upgrades to determine which services are using old versions of libraries and need restarting. [CUST-0830]
https://your-domain.example.org/controls/CUST-0830/
* Install needrestart, alternatively to debian-goodies, so that you can run needrestart after upgrades to determine which daemons are using old versions of libraries and need restarting. [CUST-0831]
https://your-domain.example.org/controls/CUST-0831/
* Install debsecan to generate lists of vulnerabilities which affect this installation. [CUST-0870]
https://your-domain.example.org/controls/CUST-0870/
* Install debsums for the verification of installed package files against MD5 checksums. [CUST-0875]
https://your-domain.example.org/controls/CUST-0875/
* Install fail2ban to automatically ban hosts that commit multiple authentication errors. [DEB-0880]
https://cisofy.com/controls/DEB-0880/
* Use a PAE enabled kernel when possible to gain native No eXecute/eXecute Disable support [KRNL-5677]
https://cisofy.com/controls/KRNL-5677/
* Discover why /vmlinuz is missing. Consider manually re-linking. [KRNL-5788]
https://cisofy.com/controls/KRNL-5788/
* Check the output of apt-cache policy manually to determine why output is empty [KRNL-5788]
https://cisofy.com/controls/KRNL-5788/
* Install a PAM module for password strength testing like pam_cracklib or pam_passwdqc [AUTH-9262]
https://cisofy.com/controls/AUTH-9262/
* Configure minimum password age in /etc/login.defs [AUTH-9286]
https://cisofy.com/controls/AUTH-9286/
* Configure maximum password age in /etc/login.defs [AUTH-9286]
https://cisofy.com/controls/AUTH-9286/
* Default umask in /etc/login.defs could be more strict like 027 [AUTH-9328]
https://cisofy.com/controls/AUTH-9328/
* To decrease the impact of a full /home file system, place /home on a separated partition [FILE-6310]
https://cisofy.com/controls/FILE-6310/
* To decrease the impact of a full /tmp file system, place /tmp on a separated partition [FILE-6310]
https://cisofy.com/controls/FILE-6310/
* To decrease the impact of a full /var file system, place /var on a separated partition [FILE-6310]
https://cisofy.com/controls/FILE-6310/
* Disable drivers like USB storage when not used, to prevent unauthorized storage or data theft [STRG-1840]
https://cisofy.com/controls/STRG-1840/
* Disable drivers like firewire storage when not used, to prevent unauthorized storage or data theft [STRG-1846]
https://cisofy.com/controls/STRG-1846/
* Install debsums utility for the verification of packages with known good database. [PKGS-7370]
https://cisofy.com/controls/PKGS-7370/
* Consider running ARP monitoring software (arpwatch,arpon) [NETW-3032]
https://cisofy.com/controls/NETW-3032/
* Consider hardening SSH configuration [SSH-7408]
- Details : AllowTcpForwarding (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : ClientAliveCountMax (3 --> 2)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : Compression (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : LogLevel (INFO --> VERBOSE)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : MaxAuthTries (6 --> 1)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : MaxSessions (10 --> 2)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : PermitRootLogin (WITHOUT-PASSWORD --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : Port (22 --> )
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : TCPKeepAlive (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : X11Forwarding (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Consider hardening SSH configuration [SSH-7408]
- Details : AllowAgentForwarding (YES --> NO)
https://cisofy.com/controls/SSH-7408/
* Add a legal banner to /etc/issue, to warn unauthorized users [BANN-7126]
https://cisofy.com/controls/BANN-7126/
* Add legal banner to /etc/issue.net, to warn unauthorized users [BANN-7130]
https://cisofy.com/controls/BANN-7130/
* Enable process accounting [ACCT-9622]
https://cisofy.com/controls/ACCT-9622/
* Enable sysstat to collect accounting (no results) [ACCT-9626]
https://cisofy.com/controls/ACCT-9626/
* Enable auditd to collect audit information [ACCT-9628]
https://cisofy.com/controls/ACCT-9628/
* Install a file integrity tool to monitor changes to critical and sensitive files [FINT-4350]
https://cisofy.com/controls/FINT-4350/
* Determine if automation tools are present for system management [TOOL-5002]
https://cisofy.com/controls/TOOL-5002/
* One or more sysctl values differ from the scan profile and could be tweaked [KRNL-6000]
https://cisofy.com/controls/KRNL-6000/
* Harden compilers like restricting access to root user only [HRDN-7222]
https://cisofy.com/controls/HRDN-7222/
* Harden the system by installing at least one malware scanner, to perform periodic file system scans [HRDN-7230]
- Solution : Install a tool like rkhunter, chkrootkit, OSSEC
https://cisofy.com/controls/HRDN-7230/
Follow-up:
----------------------------
- Show details of a test (lynis show details TEST-ID)
- Check the logfile for all details (less /var/log/lynis.log)
- Read security controls texts (https://cisofy.com)
- Use --upload to upload data to central system (Lynis Enterprise users)
================================================================================
Lynis security scan details:
Hardening index : 57 [########### ]
Tests performed : 203
Plugins enabled : 1
Components:
- Firewall [V]
- Malware scanner [X]
Lynis Modules:
- Compliance Status [?]
- Security Audit [V]
- Vulnerability Scan [V]
Files:
- Test and debug information : /var/log/lynis.log
- Report data : /var/log/lynis-report.dat
================================================================================
Notice: Lynis update available
Current version : 240 Latest version : 257
================================================================================
Lynis 2.4.0
Auditing, system hardening, and compliance for UNIX-based systems
(Linux, macOS, BSD, and others)
2007-2016, CISOfy - https://cisofy.com/lynis/
Enterprise support available (compliance, plugins, interface and tools)
================================================================================
[TIP]: Enhance Lynis audits by adding your settings to custom.prf (see /etc/lynis/default.prf for all settings)
We can see that we are granted a score of 57. We should take this score with a grain of salt, but a rule of thumb, the higher the better, and a score of around 80 is very decent.
We can see that some of these warnings are taylored towards fat x86 servers and might not make sense in our home ARM setups where we don’t have resources to spare, and we have some different constrains and usage cases.
As with anything else in security, there are compromises to me made between security and inconvenience. For this reason, I add these rules to my custom profile
custom.prf
# Won't install apt-listbugs and all its ruby dependencies
skip-test=CUST-0810
# Won't install puppet or similar
skip-test=TOOL-5002
# Raspbian doesn't have security sources ( https://www.raspberrypi.org/forums/viewtopic.php?t=98006&p=680175 )
skip-test=PKGS-7388
# We have a preset partition scheme in the SD card
skip-test=FILE-6310
# We don't use firewire
skip-test=STRG-1846
# We use USB in NCP
skip-test=STRG-1840
# Won't recompile kernel to support auditd
skip-test=ACCT-9628
# Won't be protected against DDOS in self-hosting, will save the resources
skip-test=HTTP-6640
skip-test=HTTP-6641
# vmlinuz missing at least in Raspbian
skip-test=KRNL-5788
# won't recompile kernels for PAE NX
skip-test=KRNL-5677
For NextCloudPi, the system is a bit different from plain Raspbian, so you can check a more customized profile here.
Currently, NextCloudPi has a 79 hardening score.
References
* https://www.digitalocean.com/community/tutorials/how-to-perform-security-audits-with-lynis-on-ubuntu-16-04
* https://ownyourbits.com/2017/12/23/security-audit-your-arm-board-with-lynis/