Outils pour utilisateurs

Jolla

Every thing in cli

TOH

TOHKBD

Recovery

Wallpaper

Réparer les reboots et shutdown aléatoire

  • Switch off your device
  • Remove the back cover and the battery
  • Then, with the side of your battery, push the three battery connector pins in to the device, and allow them to pop back out again. Only push them in in their natural range of motion. Please repeat this process about 10-15 times. It is critical that you move all three pins at the same time to avoid damaging individual pins!

Please note

  • The pins must not be pressed in a manner that bends them sideways or top-down. Only push them along their natural range of motion into the device, and then release to have them pop out automatically. Maintaining the mobility of these pins is very important.
  • You could also check that the contact pads on the battery are clean. If they look dirty, you can wipe them with a rough cloth or a pointy plastic object.

http://talk.maemo.org/showthread.php?t=92036

Diagnostic Tools

4G (LTE)

Unresponsive Touchscreen

Get Icloud Calendar

SD pour android

USB-Tethering Menu

Garder le jolla clean

Low-power-mode

Snappier

Enable SU

Enable FakeGAPPS and Deodex

OverCome Google Dependencies

IM

SIP

Facebook integration

Prey

RedShift-like